Speaker Cables
The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.
Shop by Type
Shop by Brand
Choosing speaker cable for your system
Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.
Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.
Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.
-
£78.33Ex. VAT
The Furutech GS-11P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 20 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
£78.33Ex. VAT
The Furutech GS-21P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 14 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
£78.33Ex. VAT
The Furutech GS-28P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 12 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
£78.33Ex. VAT
The Furutech GS-35P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 10 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
£78.33Ex. VAT
The Furutech GS-46P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 8 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
£162.50Ex. VAT
The Furutech FT-866 NCF is a pair of rhodium-plated speaker binding posts with a patented one-piece wound-wire Alpha-OCC conductor, NCF damped body and push-on internal connection for low impedance and low noise.
-
£30.83Ex. VAT
The Furutech FT-210(G) is an insulated push-on disconnect terminal for 6.35mm tabs, with a 24k gold-plated α (Alpha) pure copper contact and a yellow PolySulfone sleeve, for 12 to 10 AWG wire. Pack of 10.
-
£78.33Ex. VAT
The Furutech GS-83P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 4 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 30.
-
£205.00Ex. VAT
The Furutech FT-816 is a pair of carbon-finished speaker binding posts with rhodium-plated Alpha pure copper conductors, a damped carbon fibre and stainless steel housing, and solder or set-screw connection.
-
£360.00Ex. VAT
The Furutech FT-818 is a pair of Torque Guard speaker binding posts with rhodium-plated Alpha pure copper conductors and a torque-limiting nut that clamps every cable at the same pressure without overtightening.
-
£5.25Ex. VAT
The Furutech FS-303 is an entry-level, two-core parallel speaker cable with 15 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£100.00Ex. VAT
A pair of Furutech FP-803 speaker binding posts with 24k gold-plated Alpha phosphor bronze conductors and matt black copper alloy housings, for solder or set-screw connection of cables up to 4.5mm.