All Blustream

The HEX70USB-KIT is Blustream's new HDBaseT extender set that integrates USB 2.0 compatibility, allowing you to connect and control USB Type-B connected devices such as keyboards, webcams or microphones. This kit is capable of sending HDMI signal at 4K UHD up to 40m, or 1080p up to 70m and features PoC (power over cable) meaning that only the transmitter or receiver needs to be connected to a power source.

The HMXL42ARC-KIT by Blustream is capable of sending 4K60Hz 4:4:4 HDCP2.2 HDMI 2.0 and PoC (power over cable) up to 70m over a single CAT cable, and comes with two HDBaseT receivers, making it a product with strong performance and good value for custom installation purposes.

Blustream's DA44AU is a four input / four output Dante® digital audio converter. The DA44AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix / distribution products to be connected as an audio source within a Dante® network, as well as converting a Dante® signal back to an analogue audio signal.

The HMXL66ARC HDBaseT™ Matrix delivers new levels of advanced audio integration into our Essential range of 4K video matrix solutions. The HMXL66ARC is a 6x6 HDMI 2.0 4K 60Hz 4:4:4 matrix that uses CSC (Colour Space Conversion) technology to deliver 18Gbps HDMI over distances of up to 40m (1080p to 70m).

The HMXL88ARC HDBaseT™ Matrix delivers new levels of advanced audio integration into our Essential range of 4K video matrix solutions. The HMXL88ARC is an 8x8 HDMI 2.0 4K 60Hz 4:4:4 matrix that uses CSC (Colour Space Conversion) technology to deliver 18Gbps HDMI over distances of up to 40m (1080p to 70m).

The Blustream DMP168 is a 16x8 digital audio matrix designed for multi-zone installations. Supporting digital and analog sources, it features advanced audio processing with EQ control, lip-sync delay, stereo-to-mono conversion, and output grouping. Perfect for home or commercial setups, the DMP168 delivers clear, high-quality audio distribution with flexible routing and control.

The IP200UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that using visually lossless compression technology delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.

 

PLEASE NOTE THIS IS RECEIVER ONLY.

This comes without power supply.

The IP200UHD-TX is an industry leading 4K HDCP 2.2 HDMI transmitter that using visually lossless compression technology delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.

Designed for use with the IP250UHD-TX but still compatible with the pre-existing IP200 products, the IP250UHD-RX is capable of receiving 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP input! The IP250UHD-RX also features Dante integration and can be powered locally or via PoE from the network switch.

 

PLEASE NOTE THIS IS RECEIVER ONLY.

This comes without power supply.

Compatible with the pre-existing IP200 products, the IP250UHD-TX is capable of transmitting 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP output! The IP250UHDTX also features Dante integration and can be powered locally or via PoE from the network switch.

The Blustream IP500UHD Transceiver is a SDVoE AV over IP solution that provides the highest-quality, un-compromised 18Gbps 4K with zero latency Audio/Video extension over copper or optical fibre 10Gb Managed Networks. The IP500UHD-TZ includes support for HDMI 2.0 including distribution of HDR (High Dynamic Range), 10-bit colour content, and multi-channel HD audio signals.

The Blustream IP50HD-RX is a 1080p HD video over IP receiver from the Contractor Series, using H.265 compression to carry HDMI, bi-directional IR, RS-232 and USB for KVM over a standard 100Mbps network at distances up to 100 metres. It scales video to 1080p@60Hz, supports both unicast and multicast, and includes analogue audio breakout. Power comes from PoE or a local 12V supply.

 

PLEASE NOTE THIS IS RECEIVER ONLY.

This comes without power supply.