Speaker Cables

The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.

422 products Award Winning Dealer Since 2013 Free expert consultation

Choosing speaker cable for your system

Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.

Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.

Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.

4.95/5 from 20,728+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

156 of 162 products

Now Shopping by New Gold Clear all
  • Shunyata Research Speaker Cable
    NEW
    From
    £937.50
    Ex. VAT

    Bi-Wire & Tri-Wire Configurations available on request. Please contact us via sales@futureshop.co.uk

    The Shunyata Research Theta Speaker Cable Pair, featuring continuous-cast Ohno copper and advanced technology like the PMZ process, offers unparalleled signal resolution and precision, resulting in explosive dynamics and pitch-perfect frequency extension. With custom-designed connectors and the KPIPv2TM conditioning process enhancing durability and sonic performance, these cables seamlessly integrate into audio systems, allowing for a coherent and immersive listening experience with crystal-clear transient detail.

    View Available Worldwide Shipping Available
  • QED Performance Speaker Cable - Custom Length
    NEW

    QED

    QED Performance Speaker Cable - Custom Length

    SKU: QED Performance Speaker Cable

    £7.50
    Ex. VAT
    QED Performance Speaker Cable connects amplifier to loudspeaker through large 2.5mm² conductors of 99.999% oxygen-free copper, giving a low loop resistance of 0.017Ω/m. QED's X-Tube Plus Technology keeps the current more evenly spread from bass to treble, and factory-fitted Airloc banana plugs are cold-welded for a lasting, oxidation-free connection. Pre-terminated in 2m, 3m and 5m lengths.
    View Available Worldwide Shipping Available
  • Atlas Mavros Transpose Speaker Gold 2-4 Grun - Factory Terminated
    NEW

    Atlas Cables

    Atlas Mavros Transpose Speaker Gold 2-4 Grun - Factory Terminated

    SKU: Mavros Transpose Speaker Gold 2-4 Grun

    From
    £1,727.08
    Ex. VAT

    The Atlas Mavros Transpose Speaker Gold 2-4 Grun is a bi-wire OCC copper speaker cable with solid and stranded cores, Transpose modular plugs and Grun grounding to lower system noise.

    View Available Worldwide Shipping Available
  • Atlas Mavros Transpose Speaker Gold 4-4 Grun - Factory Terminated
    NEW

    Atlas Cables

    Atlas Mavros Transpose Speaker Gold 4-4 Grun - Factory Terminated

    SKU: Mavros Transpose Speaker Gold 4-4 Grun

    From
    £1,727.08
    Ex. VAT

    The Atlas Mavros Transpose Speaker Gold 4-4 Grun is a bi-wire OCC copper speaker cable with solid and stranded cores, Transpose modular plugs and Grun grounding to lower system noise.

    View Available Worldwide Shipping Available
  • Furutech GS-11P Gold Crimp Sleeves 20 AWG - Pack of 150
    NEW

    Furutech

    Furutech GS-11P Gold Crimp Sleeves 20 AWG - Pack of 150

    SKU: GS-11P

    £78.33
    Ex. VAT

    The Furutech GS-11P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 20 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.

    View Available Worldwide Shipping Available
  • Furutech GS-21P Gold Crimp Sleeves 14 AWG - Pack of 150
    NEW

    Furutech

    Furutech GS-21P Gold Crimp Sleeves 14 AWG - Pack of 150

    SKU: GS-21P

    £78.33
    Ex. VAT

    The Furutech GS-21P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 14 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.

    View Available Worldwide Shipping Available
  • Furutech GS-28P Gold Crimp Sleeves 12 AWG - Pack of 100
    NEW

    Furutech

    Furutech GS-28P Gold Crimp Sleeves 12 AWG - Pack of 100

    SKU: GS-28P

    £78.33
    Ex. VAT

    The Furutech GS-28P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 12 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.

    View Available Worldwide Shipping Available
  • Furutech GS-35P Gold Crimp Sleeves 10 AWG - Pack of 100
    NEW

    Furutech

    Furutech GS-35P Gold Crimp Sleeves 10 AWG - Pack of 100

    SKU: GS-35P

    £78.33
    Ex. VAT

    The Furutech GS-35P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 10 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.

    View Available Worldwide Shipping Available
  • Furutech GS-46P Gold Crimp Sleeves 8 AWG - Pack of 100
    NEW

    Furutech

    Furutech GS-46P Gold Crimp Sleeves 8 AWG - Pack of 100

    SKU: GS-46P

    £78.33
    Ex. VAT

    The Furutech GS-46P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 8 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.

    View Available Worldwide Shipping Available
  • Furutech FT-210 Gold Push-On Disconnect Terminals - Pack of 10
    NEW

    Furutech

    Furutech FT-210 Gold Push-On Disconnect Terminals - Pack of 10

    SKU: FT-210(G)

    £30.83
    Ex. VAT

    The Furutech FT-210(G) is an insulated push-on disconnect terminal for 6.35mm tabs, with a 24k gold-plated α (Alpha) pure copper contact and a yellow PolySulfone sleeve, for 12 to 10 AWG wire. Pack of 10.

    View Available Worldwide Shipping Available
  • Furutech GS-83P Gold Crimp Sleeves 4 AWG - Pack of 30
    NEW

    Furutech

    Furutech GS-83P Gold Crimp Sleeves 4 AWG - Pack of 30

    SKU: GS-83P

    £78.33
    Ex. VAT

    The Furutech GS-83P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 4 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 30.

    View Available Worldwide Shipping Available
  • Furutech FS-303 Speaker Cable - Custom Length
    NEW

    Furutech

    Furutech FS-303 Speaker Cable - Custom Length

    SKU: FS-303

    £5.25
    Ex. VAT

    The Furutech FS-303 is an entry-level, two-core parallel speaker cable with 15 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.

    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

Start by considering your amplifier and speakers. For short runs or compact systems, basic oxygen-free copper cables may suffice. But if you're after tighter bass, better detail or a wider soundstage, an upgrade to a higher-quality cable, like those from Chord Company, AudioQuest or Atlas, can make a noticeable difference. For personalised recommendations, speak to our consultants here.

Yes. Bi-wire cables separate the signal paths for high and low frequencies, which can improve control and reduce interference in compatible speakers. Single-wire cables are suitable for most systems, but bi-wire setups can offer sonic gains if your speakers and amp support them. Alternatively, you can use single-wire cables with matching jumper cables on bi-wirable speakers.

Higher-end cables often use better conductors, insulation materials, and terminations, which can reduce signal loss and interference. Whether it's worth the investment depends on your system's resolution and your listening environment. Our team can help you choose based on your priorities.

Yes, cable length can influence performance. Longer runs can introduce resistance and signal loss, especially with thinner cables. Where possible, try to keep left and right channel lengths similar, and choose an appropriate gauge for the distance.

Jumper cables replace the metal links between binding posts on bi-wireable speakers. Stock jumpers can limit performance, while high-quality alternatives preserve signal integrity and improve coherence across frequencies. When replacing your manufacturer supplied links, we recommend to use jumper cables of equal or better quality than your speaker cable.

All cables matter, and your system will require good quality cables for all of it's connections, however, if you were looking for the cable which will make the biggest difference, then we would recommend looking at the power cables from your wall socket, to your distribution block and/or amplifier. More often than not, we hear from customers, manufacturers, and our own tests that higher quality power cables can have a significant impact of the quality of your system.

This entirely depends on your current system and your expectations. You could have a decent pair of speakers which are not matched correctly with your amplifier, or vice versa. Similarly, you may want a new source of media to listen to. There are also options to upgrade other aspects of your system, such as the power, isolation or cabling to get the most out of your system before upgrading the traditional components. The best way to find out your own upgrade path is to contact our consultants and we would be happy to help you.

In short, yes, although, this depends on the quality of the cable and your speakers/amplifier. High quality speaker cables tend to be manufactured with 4 key areas, their conductor, dielectric, shielding and geometry. Each of these areas can optimise signal retention from your amplifier to your speakers. Cheaper speaker cables can use lower quality conductors (tin-plated copper or even steel-clad copper), with basic dielectrics (PVC), no shielding and minimal strands with no geometry. More expensive speaker cables start to introduce higher quality conductors (Oxygen-free Copper, Ohno Continuous Cast Copper, Silver-plated Copper or even Pure Silver), better dielectrics (XLPE, PTFE, Teflon etc.), different amounts of shielding (foil, ofc-braid, carbon etc) and various geometries (solid-core, different twists, higher gauges etc.). There are diminishing returns to consider between your speaker cable and your system, as well as the potential of bottle-necks in your system if you use a lower quality cable. All of these factors help to maintain signal integrity, reduce loss, and ensure that your amplifier and speaker are performing as intended.

Loading...
Loading...
loader
Loading...