AV Distribution
Matrix switchers, extenders, audio integration and signal conversion for multi-room and custom install AV. Professional distribution hardware from Blustream, CYP, Gefen and SEADA.
Shop by Brand
Designing AV distribution that works
AV distribution is a design job before it is a shopping job. Get the source count, display count, distances and control method clear first, and the hardware choice usually follows without much argument.
Three questions decide most systems. How many sources need to reach how many displays, and does every display need independent access to every source? What is the longest cable run, and can it be Cat6 or does it need fibre? What audio has to come out of the video path, and where does it need to arrive? Answer those and the specification largely writes itself.
The details that cause problems later are EDID handling, HDCP version support and control integration. A system that works on day one can fail when a source is replaced with one using a newer HDCP version, so specify with some headroom. IR, RS232 and IP control all need planning at design stage rather than after the cable is in the wall. If you are specifying a system, send us the layout and we will work through it with you.
-
Atlona HD Distribution
Atlona AT-UHD-EX-70-KIT 4K/UHD HDMI over HDBaseT Transmitter/Receiver KitSKU: AT-UHD-EX-70-KIT
£306.29Ex. VATPlease Note: This product is now discontinued so once our stock is gone, it's gone!!
The Atlona AT-UHD-EX-70-KIT is a 4K/UHD HDMI over HDBaseT transmitter/receiver kit for HDMI transmission up to 230 feet (70 meters) over category cable with Power over Ethernet capability.
£271.67Ex. VATPlease Note: This product is discontinued, once our stock has gone, it's gone!!
Atlona’s HDBaseT RSNET transmitter uses the advanced technology of HDBaseT combined with power over category cable (PoCc™) to extend signals to an unprecedented 328 feet (100 meters) over a single category cable.
£271.84Ex. VATPlease Note: This product is discontinued, once our stock has gone, it's gone!!
The Atlona AT-HDDA-4 is a 1×4 HDMI to HDMI distribution amplifier supporting 4K/UHD signals. 4 zones with advanced EDID management, ideal for displays using cutting-edge Ultra HD resolution.
£364.17Ex. VATBlustream's Multicast distribution platform allows distribution of HDMI video over a 1Gb Network switch. The ACM210 Advanced Control Module allows for third party control of the Multicast system using TCP/IP, RS-232 and IR. The ACM210 includes a web interface module for control and configuration of the Multicast system and features 'drag and drop' source selection with video preview and independent routing of video, audio, IR, RS-232, USB / KVM and CEC. Major third party drivers simplify Multicast product installation and negate the need for an understanding of complex network infrastructures.
£615.00Ex. VATThe Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K 18Gbps HDMI video over a 1Gb managed network. Featuring full interoperability with the IP350UHD product line, the IP300UHD-RX is an industry leading 4K HDMI receiver that, using visually lossless compression technology, delivers 18Gbps HDMI, HDCP2.2, audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
£570.00Ex. VATThe Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K 18Gbps HDMI video over a 1Gb managed network. Featuring full interoperability with the IP350UHD product line where Dante is required, the IP300UHD-TX is an industry leading 4K HDMI transmitter that, using visually lossless compression technology, delivers 18Gbps HDMI, HDCP2.2, audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface.
£769.17Ex. VATThe Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network. Featuring full interoperability with the IP300UHD product line, the IP350UHD-TX is an industry leading Dante enabled 4K HDCP 2.2 HDMI transmitter that, using visually lossless compression technology, delivers 18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface.
£809.17Ex. VATThe Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network. Featuring full interoperability with the IP300UHD product line, the IP350UHD-RX is an industry leading Dante enabled 4K HDCP 2.2 HDMI receiver that, using visually lossless compression technology, delivers 18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
£1,974.17Ex. VATIf you're looking for a high-quality 4x4 HDBaseT™ Matrix solution for your custom installation, then the HMXL44ARC is the perfect choice. The HMXL44ARC-KIT 4x4 HDBaseT™ Matrix offers unprecedented performance and value for the custom installation market.
Blustream
Blustream C44CS-KIT Contractor 4x4 HDBaseT™ CSC Matrix Kit with 70m (4K 60Hz 4:4:4 up to 40m) Bi-directional IR & PoCSKU: C44CS-KIT
£1,364.17Ex. VATBlustream's Contractor 4x4 HDBaseT™ matrix offers unprecedented performance and value for the custom installation market. The C44CS-KIT is a HDMI 2.0 4K 60Hz 4:4:4 HDCP 2.2 Matrix utilising CSC technology to deliver HDMI, bi-directional IR, and PoC up to lengths of 70m over a single CAT cable.
£624.16Ex. VATThe CYP Hyshare Pro Wireless Presentation System is an ideal purchase for anyone who is looking for a reliable, high-performance solution for wireless presentations. With simple setup and installation, you can be sure to have a smooth experience free from any messy cables. The user-friendly interface makes it easy to launch the app and get started with your presentation instantly. It also supports cross-platform collaboration with Windows, macOS, Android, and iOS systems.
£249.17Ex. VATIf you're looking for a wireless presentation system that is powerful, convenient, and affordable, the CYP WPS-QPL01 (LT01/LR01) is the perfect choice. With its plug & mirror capability, you can easily connect your HDMI source to the transmitter and your display to the receiver with no learning curve. The high speed 802.11ac Wi-Fi module and external antenna provide a great connection and smooth streaming for an enjoyable presentation experience.
Ask an Expert →Not finding what you need?Our experts can help narrow it down for your exact system.
Related Guides & Reviews
Guides
Phillip Powell
1 Nov 2025
9 min
Guides
Phillip Powell
24 Aug 2025
6 min
Guides
Phillip Powell
9 Aug 2025
9 min