HDMI

HDMI cables and infrastructure for 4K, 8K and high frame rate video, plus eARC audio. Certified cables from Atlas, AudioQuest, Chord, Kordz, QED, Supra and WireWorld in stock lengths and custom runs.

200 products Award Winning Dealer Since 2013 Free expert consultation

What matters when buying HDMI

HDMI is a data connection, so the useful question is not whether a cable sounds better but whether it carries the bandwidth your equipment needs over the distance you need it. Get that right and the picture is either perfect or obviously broken, with very little in between.

Match the specification to the source. HDMI 2.0 covers 4K at 60Hz and suits most streaming and disc playback. HDMI 2.1 at 48Gbps is required for 8K, 4K at 120Hz, variable refresh rate and the full gaming feature set. eARC support matters if you send audio back from a television to an amplifier or soundbar.

Length is where most problems start. Copper HDMI becomes unreliable as runs get longer, particularly at higher bandwidths, and the failure is usually intermittent sparkles or dropouts rather than a clean blank screen. Beyond around 5m at 4K, or 3m at 8K, active or fibre optic cable is the safer specification. Tell us the distance and the source equipment and we will confirm what will work.

4.95/5 from 20,730+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

180 of 192 products

Now Shopping by New Clear all
  • £74.17
    Ex. VAT
    iFi Audio HDMI iSilencer2, a compact HDMI signal conditioner with Active Noise Cancellation II and jitter elimination, reducing system noise by up to 100 times while supporting 8K/60Hz and 4K/120Hz with full HDMI 2.1 compatibility.
    View Available Worldwide Shipping Available
  • £1,075.00
    Ex. VAT

    The Blustream SW42DA-V2 is a 4-way HDMI switcher with multi-channel Dante audio breakout, supporting 4K 60Hz 4:4:4, Dolby Atmos, DTS-HD, ARC/eARC, 7.1ch analogue outputs, optical S/PDIF, and up to 9.1ch Dante distribution for multi-zone cinema and media room systems.

    View Available Worldwide Shipping Available
  • Blustream

    Blustream SW61AB 6-way 4K HDMI 2.0 Switch

    SKU: SW61AB

    £210.00
    Ex. VAT

    The Blustream SW61AB is a 6-input 4K HDMI 2.0 switch supporting 4K 60Hz 4:4:4 with HDR, HDCP 2.2, audio breakout to optical S/PDIF and balanced analogue outputs, and control via IP, RS-232, IR, web GUI, and front panel, with auto and priority switching.

    View Available Worldwide Shipping Available
  • Blustream

    Blustream SW41AB-V3 4-Way 4K HDMI Switch

    SKU: SW41AB-V3

    £152.50
    Ex. VAT
    The Blustream SW41AB-V3 is a 4-input 4K HDMI 2.0 switch supporting 4K 60Hz 4:4:4 with HDR and HDCP 2.2, featuring audio breakout to optical S/PDIF and balanced analogue outputs, with auto, manual, and priority switching and control via IP, RS-232, IR, and web GUI.
    View Available Worldwide Shipping Available
  • Blustream

    Blustream SP18CS-V2 8-Way 4K HDMI 2.0 HDCP 2.2 Splitter

    SKU: SP18CS-V2

    £363.00
    Ex. VAT
    The Blustream SP18CS-V2 is an 8-way 4K HDMI 2.0 splitter supporting 4K 60Hz 4:4:4 with HDR, per-output smart scaling for mixed-resolution display environments, audio breakout to optical S/PDIF and analogue outputs, and advanced EDID management.
    View Available Worldwide Shipping Available
  • £276.66
    Ex. VAT
    The CYP QU-2-8K23 is a 1x2 HDMI distribution amplifier that splits a single HDMI source to two identical outputs at resolutions up to 8K. Built to the HDMI 2.1 specification with 48Gbps bandwidth, it supports HDR, multichannel HD Bitstream audio and HDCP 2.3, with front-panel EDID management for reliable handshaking. A 3.5mm stereo output provides analogue audio breakout from LPCM 2.0 sources.
    View Available Worldwide Shipping Available
  • £443.32
    Ex. VAT
    The CYP QU-4-8K23 is a 1x4 HDMI distribution amplifier that splits a single HDMI source to four identical outputs at resolutions up to 8K. Built to the HDMI 2.1 specification with 48Gbps bandwidth, it supports HDR, multichannel HD Bitstream audio and HDCP 2.3, with front-panel EDID management for reliable handshaking. A 3.5mm stereo output provides analogue audio breakout from LPCM 2.0 sources.
    View Available Worldwide Shipping Available
  • Wireworld

    WireWorld Platinum Starlight 48 HDMI Cable

    SKU: PSH-48

    From
    £538.29
    Ex. VAT
    The Wireworld Platinum Starlight 48 is the flagship of Wireworld's HDMI range, built with solid silver conductors, COMPOSILEX 3 insulation and exclusive Uni-Path geometry. It supports the full 48Gbps data rate for 8K video, Dynamic HDR, 48-bit Deep Colour, HDCP 2.3 and eARC. Carbon fibre plugs with silver-clad contacts and double thickness shields make it equally suited to high-end home cinema and I2S audio links.
    View Available Worldwide Shipping Available
  • Blustream SP12CS-V2 2-Way 4K HDMI 2.0 Splitter with Smart Scaling
    NEW

    Blustream

    Blustream SP12CS-V2 2-Way 4K HDMI 2.0 Splitter with Smart Scaling

    SKU: SP12CS-V2

    £96.80
    Ex. VAT
    The Blustream SP12CS-V2 is a two-way HDMI splitter that sends one 4K source to two displays simultaneously, supporting the full HDMI 2.0 18Gbps specification with HDR and HDCP 2.2. Smart Scaling independently down-converts each output, so a 1080p display on one port does not force the other down from 4K. Audio breaks out to both optical digital and analogue stereo at the same time.
    View Available Worldwide Shipping Available
  • Furutech HF-A-NCF ULTRA HIGH-SPEED HDMI 8K V2.1 CABLE
    NEW

    Furutech

    Furutech HF-A-NCF ULTRA HIGH-SPEED HDMI 8K V2.1 CABLE

    SKU: HF-A-NCF

    From
    £212.50
    Ex. VAT
    The Furutech HF-A-NCF is an active optical HDMI 2.1 cable that carries the digital signal over four OM3 glass fibres rather than copper, with photoelectric conversion chips built into the connectors. It handles 48Gbps for 8K60 and 4K120, with eARC, HDR10+, VRR and HDCP 2.3, and at 4.7mm across it is thinner and more flexible than copper equivalents. Available in seven lengths from 1.5m to 20m.
    View Available Worldwide Shipping Available
  • Furutech HF-X NCF ULTRA HIGH-SPEED HDMI V2.1 CABLE
    NEW

    Furutech

    Furutech HF-X NCF ULTRA HIGH-SPEED HDMI V2.1 CABLE

    SKU: HF-X-NCF

    From
    £166.67
    Ex. VAT
    The Furutech HF-X-NCF is a copper Ultra High Speed HDMI 2.1 cable carrying the full 48Gbps for 8K60 and 4K120, with eARC, HDR10+, VRR and HDCP 2.3. It uses silver-plated micro-OFC conductors under double aluminium foil shielding, with connector shells loaded with Furutech's NCF anti-static damping material and thick gold-plated contacts. Deliberately rigid at 8.5mm for transmission stability. Four lengths to 5 metres.
    View Available Worldwide Shipping Available
  • Gefen Ultra High Speed 8K HDMI 2.1 Certified Cable (Passive)
    NEW

    Gefen

    Gefen Ultra High Speed 8K HDMI 2.1 Certified Cable (Passive)

    SKU: GEF-CAB-HS-HDMI Passive

    From
    £43.20 £48.00
    Ex. VAT ✓ Save £4.80
    The Gefen Ultra High Speed HDMI Cable is a certified 48Gbps HDMI 2.1 cable for 8K and 4K at 120Hz. It passes Dynamic HDR, eARC and the next-generation gaming features VRR, ALLM, QMS and QFT. It has 24K gold-plated diecast connectors and a thin, flexible design up to 50% slimmer than conventional HDMI cables. Passive, plug-and-play, in 2m and 3m.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

HDMI over IP, sometimes called AV over IP, converts video and audio into IP packets that can be distributed across a standard Ethernet network. This approach allows for scalable and flexible AV systems with extended reach, simplified control, and cost-effective multi-display installations. CYP Europe’s AV over IP solutions provide future-ready performance that integrates seamlessly into modern networks.

HDMI 2.1 offers significantly higher bandwidth than HDMI 2.0 (48Gbps vs 18Gbps), supporting 4K at 120Hz, 8K at 60Hz, Dynamic HDR, and advanced gaming features such as Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM). These upgrades provide smoother visuals and better sound when used with compatible devices.

Yes. Ultra High Speed HDMI cables are certified to handle the full 48Gbps bandwidth required for 4K/120Hz and 8K signals. They also ensure compatibility with features like eARC and Dynamic HDR for optimal performance.

Passive HDMI cables typically work up to 5–7m without issues. For longer runs, use active HDMI or fibre optic HDMI cables, which maintain full 4K/8K signal integrity over extended distances.

Yes. HDMI is backward compatible, meaning newer cables work with older HDMI devices. With adapters, HDMI can also connect to DVI, though DVI does not carry audio.

Absolutely. HDMI transmits both digital video and multi-channel audio, including Dolby Atmos and DTS:X, through a single cable for a clean, high-fidelity connection.

These devices allow one or multiple HDMI sources to feed multiple displays. A splitter duplicates the signal, while a matrix switch lets you send different inputs to different screens.

For distances over 10m, use active HDMI, HDBaseT extenders, or fibre HDMI cables. These maintain 4K/8K signal quality without loss.

Use an EDID manager or compatible distribution amplifier. This ensures all connected devices communicate correctly and avoid handshake issues.

HDMI 2.1 introduces eARC (Enhanced Audio Return Channel) as an improvement over HDMI 2.0's ARC. By utilising the higher bandwidth capabilities of HDMI 2.1, eARC can send uncompressed multi-channel audio from your TV to your amplifier/speakers. Similarly, the higher bandwidth of the A/V channels of HDMI 2.1 also support uncompressed multi-channel audio from your source to your amplifier/speakers. The higher bandwidth of HDMI 2.1 is also suited for I2S connections to support a wider range of resolutions.

Loading...
Loading...
loader
Loading...