AV Distribution
Matrix switchers, extenders, audio integration and signal conversion for multi-room and custom install AV. Professional distribution hardware from Blustream, CYP, Gefen and SEADA.
Shop by Brand
Designing AV distribution that works
AV distribution is a design job before it is a shopping job. Get the source count, display count, distances and control method clear first, and the hardware choice usually follows without much argument.
Three questions decide most systems. How many sources need to reach how many displays, and does every display need independent access to every source? What is the longest cable run, and can it be Cat6 or does it need fibre? What audio has to come out of the video path, and where does it need to arrive? Answer those and the specification largely writes itself.
The details that cause problems later are EDID handling, HDCP version support and control integration. A system that works on day one can fail when a source is replaced with one using a newer HDCP version, so specify with some headroom. IR, RS232 and IP control all need planning at design stage rather than after the cable is in the wall. If you are specifying a system, send us the layout and we will work through it with you.
-
NEW£1,860.00Inc. VATThe Blustream CMX88CS-V2 is an 8x8 4K HDMI 2.0 matrix switcher that routes any of eight HDMI sources to any of eight displays. Part of Blustream's Contractor Series, it carries 18Gbps signals up to 4K 60Hz 4:4:4 with HDR, downscales individual outputs for older screens, and breaks out zone audio to analogue and optical outputs for multi-room installations. -
NEW£178.00Ex. VATThe Blustream DA11USB-V3 is a USB Dante® audio encoder and decoder that links a computer to a Dante audio network in both directions. Built on Audinate's DEP platform, it sends two channels of USB audio onto the network and returns two Dante channels to the computer at up to 96kHz/24-bit, with selectable USB-B and USB-C ports, AES67 support and power from PoE or the USB host.
-
NEW£174.33Ex. VATThe Blustream DA11AEN-V2 is a Dante® audio analogue encoder that converts balanced or unbalanced two-channel analogue audio into a Dante network stream. It supports sample rates up to 96kHz at up to 32-bit, AES67 RTP transport and adjustable 2 to 10ms latency, and runs from a PoE network switch or an optional 12V supply, making it a simple way to bring any analogue source onto a Dante system.
-
NEW£230.00Ex. VATThe Blustream DA11XLRDE is a Dante® audio to analogue XLR decoder that turns two channels from a Dante network into balanced or unbalanced XLR outputs. Powered by PoE from a network switch or by a local 12V supply, it supports AES67, sample rates up to 96kHz and independent gain on each channel, making it a simple way to feed a mixing desk, powered speaker or amplifier from a networked audio system. -
£29.12Ex. VATAudioQuest Mini DisplayPort to HDMI Adaptor -
£55.00Ex. VATA male to male, 6ft DisplayPort Cable. Suitable for any displays with resolutions up to 2560x1600. -
£28.00Ex. VAT6ft VGA to VGA Cable -
SALE£56.70 £63.00Ex. VAT ✓ Save £6.30Provides a simple, economical adaption from a DVI male connector to a DVI female connector. -
SALEFrom£50.00Ex. VATSupports HDMI Ethernet Channel (HEC), which consolidates video, audio, and data streams into a single HDMI cable, combining the unmatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. -
From£16.12Ex. VATBlustream's Micro Form HDMI cable transmits all video resolutions up to and including 4K -
From£12.49Ex. VATThe CYP HDMP is a certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content. -
Blustream
Blustream PS122 12V/2A Power Supply for HDBaseT Transmitters and ReceiversSKU: PS122
(2 reviews)£24.96Ex. VAT
