AV Distribution
Matrix switchers, extenders, audio integration and signal conversion for multi-room and custom install AV. Professional distribution hardware from Blustream, CYP, Gefen and SEADA.
Shop by Brand
Designing AV distribution that works
AV distribution is a design job before it is a shopping job. Get the source count, display count, distances and control method clear first, and the hardware choice usually follows without much argument.
Three questions decide most systems. How many sources need to reach how many displays, and does every display need independent access to every source? What is the longest cable run, and can it be Cat6 or does it need fibre? What audio has to come out of the video path, and where does it need to arrive? Answer those and the specification largely writes itself.
The details that cause problems later are EDID handling, HDCP version support and control integration. A system that works on day one can fail when a source is replaced with one using a newer HDCP version, so specify with some headroom. IR, RS232 and IP control all need planning at design stage rather than after the cable is in the wall. If you are specifying a system, send us the layout and we will work through it with you.
-
£294.63Ex. VATThe IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver. -
£330.86Ex. VAT
The Blustream IP50HD-RX is a 1080p HD video over IP receiver from the Contractor Series, using H.265 compression to carry HDMI, bi-directional IR, RS-232 and USB for KVM over a standard 100Mbps network at distances up to 100 metres. It scales video to 1080p@60Hz, supports both unicast and multicast, and includes analogue audio breakout. Power comes from PoE or a local 12V supply.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
-
£695.00Ex. VATCompatible with the pre-existing IP200 products, the IP250UHD-TX is capable of transmitting 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP output! The IP250UHDTX also features Dante integration and can be powered locally or via PoE from the network switch.
-
£715.00Ex. VATDesigned for use with the IP250UHD-TX but still compatible with the pre-existing IP200 products, the IP250UHD-RX is capable of receiving 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP input! The IP250UHD-RX also features Dante integration and can be powered locally or via PoE from the network switch.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
-
£669.00Inc. VATThe HEX18G-Kit by Blustream is the first extender set using the new VS3000 HDBaseT chipset, which means totally uncompressed HDMI 2.0 4k 60Hz 4:4:4 over distances up to 100m over a single CAT6A cable! This kit also features bi-directional PoC (power over cable), meaning that only one of the units needs to be connected to a power source. -
Blustream
Blustream HMXL42ARC-KIT 4x2 HDBaseT™ CSC Matrix Kit - 70m (4K60Hz 4:4:4 up to 40m)SKU: HMXL42ARC-KIT
£1,051.67Ex. VATThe HMXL42ARC-KIT by Blustream is capable of sending 4K60Hz 4:4:4 HDCP2.2 HDMI 2.0 and PoC (power over cable) up to 70m over a single CAT cable, and comes with two HDBaseT receivers, making it a product with strong performance and good value for custom installation purposes. -
£173.33Ex. VAT -
£444.17Ex. VATThe HEX70USB-KIT is Blustream's new HDBaseT extender set that integrates USB 2.0 compatibility, allowing you to connect and control USB Type-B connected devices such as keyboards, webcams or microphones. This kit is capable of sending HDMI signal at 4K UHD up to 40m, or 1080p up to 70m and features PoC (power over cable) meaning that only the transmitter or receiver needs to be connected to a power source. -
£766.66Ex. VATThe AVX-101F-KIT 4K UHD+ HDMI over Fiber KIT is designed for high-quality AV extension with minimal latency thanks to AVX technology. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4) HDMI audio/video streams. -
£336.67Ex. VATThe UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend USB 2.0 data, 2ch analogue audio, and control signals up to 100m over a single CAT cable. -
£675.00Ex. VATThe HEX18GARC-KIT extender set is an industry leading uncompressed, unconverted HDMI 2.0 4K 60Hz 4:4:4 HDCP 2.3/2.2 solution utilising the latest in HDBaseT™ technology. The HEX18GARC-KIT supports uncompressed distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision resulting in the ultimate in picture quality for your critical viewing areas. -
£1,093.33Ex. VATThe HEX70HDUK-KIT extender set is an industry leading HDMI2.0 4K 60Hz 4:4:4 (18Gbps) HDCP2.2 HDBaseT™ multi-format solution utilising CSC technology to deliver HDMI, USB-C and DisplayPort™ up to lengths of 40m (70m at 1080p) over a single CAT cable. The HEX70HDUK-KIT provides enhanced features including USB 2.0 extension, local HDMI input on the HDBaseT™ Receiver for additional source input, web-GUI for control and configuration, auto display control, audio breakout and bi-directional IR pass-through.
