AV Distribution
Matrix switchers, extenders, audio integration and signal conversion for multi-room and custom install AV. Professional distribution hardware from Blustream, CYP, Gefen and SEADA.
Shop by Brand
Designing AV distribution that works
AV distribution is a design job before it is a shopping job. Get the source count, display count, distances and control method clear first, and the hardware choice usually follows without much argument.
Three questions decide most systems. How many sources need to reach how many displays, and does every display need independent access to every source? What is the longest cable run, and can it be Cat6 or does it need fibre? What audio has to come out of the video path, and where does it need to arrive? Answer those and the specification largely writes itself.
The details that cause problems later are EDID handling, HDCP version support and control integration. A system that works on day one can fail when a source is replaced with one using a newer HDCP version, so specify with some headroom. IR, RS232 and IP control all need planning at design stage rather than after the cable is in the wall. If you are specifying a system, send us the layout and we will work through it with you.
-
CYP
CYP PUV-3050UA-KIT – HDBaseT3 Full 4K HDMI KIT with USB, PoH, Audio Pathway & HDMI bypassSKU: PUV-3050UA-KIT
£759.16Ex. VATThe CYP PUV-3050UA-KIT is a HDBaseT 3.0 transmitter and receiver kit that extends uncompressed 4K HDMI, USB 2.0, audio, IR and RS-232 over a single Cat6a/7 cable up to 40 metres. Unlike compressed extenders it carries native HDMI 2.0 4K@60 4:4:4 with HDR, and adds USB 2.0 extension for KVM and touchscreen control. It also features HDMI bypass and a bi-directional analogue audio pathway, with the PoH-powered receiver. -
£571.66Ex. VATThe CYP PUV-1230PL-KIT is an HDBaseT-Lite transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232 and power over a single Cat6a/7 cable up to 60 metres. It carries 4K UHD up to 4K@30 4:4:4 or 4K@60 4:2:0, with Optical Audio Return (OAR) and a separate analogue stereo audio output at the receiver for flexible audio routing. The receiver is powered over HDBaseT and the kit is HDCP 2.2 compliant and TAA certified.
-
CYP
CYP PUV-1610-KIT – Standard HDBaseT1 KIT for the Reverse Power PUV-1600 SeriesSKU: PUV-1610-KIT
£647.49Ex. VATThe CYP PUV-1610-KIT is a standard HDBaseT transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232, Ethernet and power over a single Cat6a/7 cable up to 100 metres. Its defining feature is reverse power: the mains-powered receiver sends power back to the transmitter over the cable, adding flexibility when the source has no spare power. It carries 4K up to 4K@30 4:4:4 or 4K@60 4:2:0 and is HDCP 2.2 compliant. -
CYP
CYP PUV-2200PL-KIT – HDBaseT2 LITE Transmitter & Receiver Kit with USB, PoH & Audio PathwaySKU: PUV-2200PL-KIT
£676.66Ex. VATThe CYP PUV-2200PL-KIT is a HDBaseT 2.0 Lite transmitter and receiver kit that extends uncompressed 4K HDMI, USB 3.0, audio and control over a single Cat5e/6/7 cable up to 40 metres. It carries 4K@60 4:2:0 with multi-port USB 3.0 for peripherals, plus analogue audio in/out and a microphone input for flexible audio and conferencing. The receiver is powered over HDBaseT, and the kit is HDMI 2.0 and HDCP 2.2 compliant and TAA certified. -
£321.99Inc. VATThe CYP PU-305BDA-KIT is a bi-directional analogue audio extender kit that sends and receives stereo audio over a single Cat5e/6/7 cable at distances up to 300 metres. Each unit can both transmit and receive on RCA connectors, and RS-232 pass-through is carried alongside for device control. Power over CAT lets a single supply power either end, and the kit handles 96kHz 24-bit audio and is TAA certified. -
CYP
CYP PUV-2606TX – Standard HDBaseT2 Transmitter with USB for the Reverse Power PUV-2600 Series or EL-8400VASKU: CYP PUV-2606TX
£499.99Ex. VATThe CYP PUV-2606TX is a HDBaseT 2.0 transmitter for the reverse-power PUV-2600 series that sends uncompressed 4K HDMI, audio, Ethernet, USB and control over a single Cat6/7 cable up to 100 metres. It adds USB 3.0 extension for KVM, analogue audio embedding, and IP control via WebGUI or Telnet, and can be powered locally or over HDBaseT from the receiver. It is HDCP 2.2 compliant and TAA certified. -
CYP
CYP EL-8400VA – 6 x 2 Presentation Seamless Matrix with USB & Audio/Mic I/O plus a built-in audio amplifierSKU: EL-8400VA
£2,499.99Ex. VATThe CYP EL-8400VA is a 6x2 seamless presentation matrix with integrated scaling that switches HDMI, DisplayPort, USB-C and HDBaseT sources to an HDMI and an HDBaseT2 output at up to 4K@60. It pairs seamless switching, USB-C and KVM with a full audio system: a DSP mixer, dual mic inputs with phantom power and a built-in 20W-per-channel amplifier. It is controlled via front panel, OSD, RS-232, Telnet and WebGUI, and can power a compatible HDBaseT endpoint over PoH. -
CYP
CYP OUTX-2100-AVLC – HDBaseT2 Full 4K 4-port Output Card with AVLC for the MODX-1616SKU: OUTX-2100-AVLC
£2,184.99Ex. VATThe CYP OUTX-2100-AVLC is a 4-port HDBaseT 2.0 output card for the MODX-1616 modular matrix, driving up to four HDBaseT receivers with 4K HDMI, audio, IR, RS-232, Ethernet and power over single Cat6a/7 cables. Using AVLC visually lossless compression, it delivers 4K@60 4:4:4 with HDR and Dolby Vision at up to 70 metres, or 1080p at up to 100 metres. It adds four analogue audio breakout outputs and is powered by the host chassis. -
£692.49Ex. VATThe CYP XA-8P is a battery-powered 8K HDMI pattern generator and analyser, giving AV installers a portable tool to test and verify every part of an HDMI signal path. It generates up to 40 resolutions and 20 test patterns to 8K, and analyses source and sink signals with EDID management, HDCP and SCDC monitoring, and HDR handling. HDMI 2.1 compliant with 40Gbps support, it fits in the palm and recharges over USB-C. -
£1,026.66Ex. VATThe CYP XA-FAK Pro AV Installer First Aid Kit is a curated bundle of CYP backup essentials for solving common on-site installation problems quickly. It brings together the XA-3P 4K HDMI pattern generator, analyser and cable tester, an RE-101-4K22 HDMI repeater, an RE-EDID-4K22 EDID manager, 1m and 2m Ultra High Speed 8K HDMI cables, and the XA-CASE hard case. It is the kind of go-to kit that turns a site snag into a quick fix.
-
£1,316.66Ex. VATThe CYP WPS-HP201-KIT HyShare Pro is a wireless presentation system that lets users share their screen to a display without cables. The kit pairs a receiver base station, which outputs to HDMI or VGA, with two USB-C pods for instant plug-and-play sharing, and also supports casting via the HyShare Pro app or a web browser across Windows, macOS, Android and iOS. It adds whiteboard, annotation and moderation tools, with up to 20 remote viewers. -
£499.16Ex. VATThe CYP WPS-HP201T is a two-pack of Hyshare Pro wireless presentation pods that connect a laptop, tablet or phone to a Hyshare Pro meeting room system over USB-C. Each pod transmits video and audio wirelessly at the press of a button, with no app, driver or web browser required. Sharing works at ranges of up to 10 metres, keeping the meeting table free of cables.
